Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Yorba Linda Homeowners Choose Unilock Construction
We provide independent Unilock construction service in Yorba Linda, and what sets our work apart is the detail most installers skip: base compaction to Unilock’s specified density, genuine Tru-Lock jointing sand, and edge restraint set in concrete instead of spiked into clay. We’re an independent hardscape contractor working exclusively with Unilock systems. We are not authorized, sponsored, or endorsed by Unilock, and we don’t claim to be. We simply know their products better than most because we install them every week.
Unilock makes segmental concrete pavers and retaining wall systems built around proprietary face mixes and jointing details. Those details are what decide whether a Yorba Linda driveway still sits flat after a decade of hot inland summers and Santa Ana wind events, or starts rocking at the joints after the first heavy rain. Our technicians have up to 9 years of experience with these systems, and we handle paver driveways, paver patios, and full driveway replacements across Yorba Linda.
Call (888) 356-5940 for a free estimate on your Unilock project. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Yorba Linda for Your Unilock Construction?
Unilock pavers aren’t a commodity product you can treat like generic concrete. Each line has its own surface texture, thickness, and jointing requirement, and the installation details that protect the surface warranty are specific to the system. We work with those details rather than around them.
That means we specify genuine Unilock components: Tru-Lock jointing sand, Unilock edge restraint, and manufacturer-recommended sealers. Aftermarket substitutes are cheaper up front and fail faster under Yorba Linda’s thermal cycling, and some of them void the product’s surface warranty outright. We’d rather not put a homeowner in that position.
It also means we read the site before we quote it. Yorba Linda is a former citrus-and-avocado ranch town, and new construction here repeatedly collides with what’s under the topsoil: old grove irrigation lines, windrows, and undocumented ranch-era footings. A simple patio or driveway replacement can turn into excavation archaeology. We plan for that instead of discovering it mid-pour. And because any project near a mature coast live oak triggers the City’s oak-preservation review before a single foundation form goes in, we factor site review into the schedule from the start.
You choose the brand and the line. We handle the installation to spec. Estimates are free and written line by line.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Fix in Yorba Linda
Most Unilock failures we see in Yorba Linda trace back to installation conditions or local water chemistry rather than the paver itself. Here are the recurring ones.
- Efflorescence on Brussels Block and Town Hall pavers. That white powdery bloom comes from high alkalinity in the paver mix reacting with moisture, and Yorba Linda’s hard irrigation water makes it worse. It’s a surface condition, not structural damage, but repeated blooms point to water finding its way into the joints. We trace where the moisture is coming from before recommending a treatment.
- Joint sand erosion and paver shifting on Beacon Hill driveways. When the base wasn’t compacted to Unilock’s specified 98% Proctor density, the pavement moves under load. Sloped driveways show it first, with sand washing out of the joints and pavers rocking near the street. Fixing the sand alone won’t hold. The base has to be corrected.
- Edge restraint failure on Richcliff patios. Plastic edge restraint spiked into expansive clay without a concrete curb is a common shortcut, and it’s the one that spalls and separates. Once the edge walks, the whole field loosens behind it.
- Surface staining and color loss on EnduraColor pavers. Solvent-based sealers can trap moisture in the surface and cloud the finish rather than protect it. Citrus drop in backyard installations stains the same surfaces if it’s left to sit through the season.
- Mismatched patch repairs. A cracked or spalled paver replaced from a different dye lot reads as a visible scar. Matching the lot, or replacing a defined area cleanly, is the difference between a repair you notice and one you don’t.
A typical repair goes like this. A homeowner notices that the Brussels Block driveway pavers near the street are rocking and the joints are washing out after winter rains. The usual cause is a base that wasn’t properly compacted during the original install, combined with edge restraint that was spiked into soil rather than set in concrete. A qualified Unilock installer typically removes the affected field, re-compacts the sub-base to spec, re-sets the pavers on a fresh bedding course, and installs a proper concrete edge restraint before re-sanding with Tru-Lock. That’s the sequence. Skipping any step brings the problem back.
Unilock Parts & Our Repair-vs-Replace Approach
We don’t stock or warehouse Unilock materials, and we’re not a Unilock dealer. What we do is specify genuine Unilock OEM components for every repair and installation: Tru-Lock jointing sand, Unilock edge restraint, and manufacturer-recommended sealers. Quality parts that fit the system are what keep the surface warranty intact and what hold up under Yorba Linda’s thermal cycling.
On the repair-or-replace question, our default is repair. When a paver is cracked or spalled, we first try to source a matching dye lot for a seamless fix. Color and texture vary between lots, so this matters more than it sounds. If the line has been discontinued or the lot is gone, we recommend replacing the affected area with a current Unilock line rather than patching with mismatched aftermarket product that will look wrong and behave differently.
The written estimate lays out which path we recommend and why, with the cost of each. Pricing is set per job by that estimate. Call (888) 356-5940 to schedule yours; estimates are free.
Our Unilock Service Process – Step by Step
- 1
Site diagnosis. We walk the pavement, check joint sand depth, probe the edge restraint, and look for the moisture source behind efflorescence or staining. On older grove lots off Yorba Linda Boulevard, we also check for abandoned redwood irrigation standpipes and concrete headgates before anyone digs.
- 2
Scope and line-item estimate. You get the recommended repair or installation path written out with pricing per line, so you can compare a targeted fix against a full section replacement.
- 3
Repair or installation. Affected pavers come up, the sub-base is re-compacted to spec, a fresh bedding course goes down, and edge restraint is set in concrete. New installations follow Unilock’s specified base and jointing details from the start, including Tru-Lock sand.
- 4
Sealing and finish check. We confirm the joint sand is properly filled and the surface is ready before any sealer goes on, and we use manufacturer-recommended product only.
- 5
Walkthrough and warranty. We review what was done, what to watch for seasonally, and the workmanship warranty that backs our installation.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Yorba Linda
We work across the Unilock paver systems homeowners in Yorba Linda ask for most. Brussels Block, the tumbled traditional paver, is the one we see on the widest range of driveways. Beacon Hill gives a smoother flagstone-style surface for patios and walkways. Richcliff brings a textured natural-stone look that suits the hillside lots around the Santa Ana River bluffs. Town Hall is the large-format, clean-lined option for modern facades and wide drive aprons.
Beyond the pavers themselves, we service and install the jointing sand, edge restraint, and sealing systems that go with them. We don’t claim to stock any of it. We specify what fits the system and install it correctly. Paver driveway installation, paver patio installation, and full driveway replacement are the three jobs we handle most in Yorba Linda.
We Also Service These Brands
Unilock is one line among many we work with. Homeowners planning more than a driveway often want the whole exterior and interior spec’d together, and we carry the brand depth to do it. That includes cabinetry from KraftMaid, countertop surfaces from Cambria and Silestone, and plumbing fixtures from Kohler, alongside other paver lines. One contractor, every trade, and you choose the product rather than taking whatever happens to be on hand.
FAQs – Unilock Construction Service in Yorba Linda
No. We are an independent Unilock service provider and installer, not authorized, sponsored, or endorsed by Unilock. We work with their systems because we know them well, not because of any manufacturer affiliation. Call (888) 356-5940 for a free estimate on your Yorba Linda project.
Yes. We specify genuine Unilock OEM components, including Tru-Lock jointing sand, Unilock edge restraint, and manufacturer-recommended sealers. Aftermarket substitutes can void the product’s surface warranty and tend to fail faster under local temperature swings. We don’t stock or warehouse these materials, but we source what fits the system for each job.
Most targeted repairs, like re-setting a rocking section of driveway pavers or replacing failed edge restraint, run one to two days once the scope is set. A full paver driveway installation typically takes longer, and site conditions can extend it. On Yorba Linda’s older grove lots, buried irrigation lines and ranch-era footings can surface during excavation and affect the schedule. The written estimate lays out the expected timeline before work begins.
We cover Unilock paver systems including Brussels Block, Beacon Hill, Richcliff, and Town Hall, along with the jointing sand, edge restraint, and sealing components that go with them. We handle paver driveways, paver patios, and driveway replacements. We don’t service other categories of Unilock products outside hardscape.
Not when the work is done to spec with genuine Unilock components. Improper installation, aftermarket joint sand, or solvent-based sealers applied incorrectly are what put a surface warranty at risk. We install to Unilock’s specified details, including base compaction and proper edge restraint set in concrete, specifically to keep the warranty intact. Ask us to walk you through it on the estimate.
Typical estimated ranges for the three jobs we handle most are below. The written estimate sets the final price, and estimates are free.
| Service | Typical Estimated Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Call (888) 356-5940 for an exact quote on your Yorba Linda property.
That’s efflorescence, a natural bloom from high alkalinity in the paver mix reacting with moisture. Yorba Linda’s hard irrigation water makes it more likely and more persistent. It’s a surface condition rather than structural failure, but repeated blooms usually mean water is getting into the joints. Call (888) 356-5940 and we’ll trace the moisture source before recommending a treatment.
Usually not as a straight overlay, and we don’t recommend it. Unilock systems depend on a properly compacted aggregate base, and concrete that’s cracked, settled, or holding moisture won’t provide that. The surface warranty and long-term performance both hinge on the base. A driveway replacement with the concrete removed and the sub-base built to spec is the reliable path. Call (888) 356-5940 for a free assessment.
Tru-Lock jointing sand is the specified product for Unilock systems, and it’s what we use. Generic or aftermarket joint sand doesn’t lock the same way and can void the surface warranty. Joint sand erosion on Beacon Hill driveways usually points back to a base that wasn’t compacted to Unilock’s specified 98% Proctor density, so re-sanding alone won’t fix it. Call (888) 356-5940 for an estimate.
It depends on whether a matching dye lot can still be sourced. Color and texture vary between lots, so we check first. If the line or lot is gone, patching with mismatched aftermarket product looks wrong and behaves differently. We’d recommend replacing the affected area with a current Unilock line for a clean result. Call (888) 356-5940 and we’ll assess the field.
Sealing helps, but only with the right product and timing. Solvent-based sealers can trap moisture in the surface and cloud EnduraColor finishes, which is worse than leaving them unsealed. Manufacturer-recommended sealers applied to a dry surface hold up best through hot inland summers and Santa Ana wind events. Call (888) 356-5940 for a free evaluation of your pavement.
Book Your Unilock Service in Yorba Linda, CA
Whether your Unilock driveway is rocking at the joints, your patio edge has separated, or you’re planning a new paver installation, we’ll give you a straight read on what’s failing and what it takes to fix it. Call (888) 356-5940 for a free written estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Yorba Linda.