Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Yorba Linda Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction service in Yorba Linda, CA, specializing in frameless shower enclosures, semi-frameless shower systems, and custom glass panels. What makes our Mr-Glass work different is that we handle the glass and the bathroom around it, so the enclosure, the tile base, and the plumbing get spec’d together instead of passed between separate trades. Whether a Yorba Linda frameless door has stopped closing squarely or you’re planning a full walk-in shower build, we can diagnose it, quote it, and install it under one contract.
Construction Yorba Linda is not affiliated with, authorized by, or endorsed by Mr-Glass. We’re an independent service provider, and we say that plainly because you deserve to know exactly who’s doing the work. Our technicians have up to 9 years of experience with this kind of glass hardware, and access to more than 50 named manufacturers across the trades we cover means you’re never locked into one product line. Call (888) 356-5940 to schedule a free estimate.
Why Trust Construction Yorba Linda for Your Mr-Glass Construction?
Mr-Glass shower hardware has its own feel. Frameless doors hang on pivot hinges with very little margin, and a few degrees of misalignment at the pivot shows up as a door that swings open on its own or drags the sweep across the curb. Our technicians work with that hardware often enough to know how a properly hung panel should sit before the door even closes. That familiarity saves you guesswork and repeat visits.
We service with quality parts that fit your Mr-Glass equipment. When a hinge, sweep, or seal needs replacing, the part has to match your panel thickness and tolerance or it will leak or bind, and we check those specs before anything goes on the truck or into your home. We don’t stock OEM or genuine Mr-Glass parts, and we don’t claim to be a Mr-Glass dealer. What we do is choose parts that fit correctly and install them in a way that respects your original enclosure.
Warranty-safe practices matter here. We document what we remove and what we install, we don’t drill or alter glass unnecessarily, and we keep the existing structure intact wherever the glass is still sound. If something goes wrong later, you have a clear record of the work. That’s how you protect a shower you’ve already paid for. Call (888) 356-5940 to talk through your Mr-Glass project in Yorba Linda.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Yorba Linda
These are the failures we see most often on Mr-Glass frameless and semi-frameless enclosures. Each one has a cause you can usually narrow down before you call.
- Door sag from worn pivot hinges. Older frameless units hang the door’s full weight on a small pivot point, and over years that hinge wears, the door drops, and it stops meeting the strike jamb squarely. You’ll notice it swinging open on its own or rubbing the curb. Replacing the hinges and re-aligning the door usually corrects it.
- Water leaking past aged bottom sweeps and magnetic seals. The bottom sweep and the magnetic closure strip are the two parts that take the daily wear, and both dry out and lose their seal. Water escapes at the curb and pools on the bathroom floor. A fresh sweep and seal is a small fix that solves most leaks.
- Tempered glass edge chipping or seal failure around the enclosure. Tempered panels are strong face-on but vulnerable at the edge. A chip at the edge compromises the panel, and a failed perimeter seal lets moisture sit against the glass and the track. Chipped tempered glass should be replaced, not patched.
- Hinge screws loosening from the wall or frame. Wall-mounted hinges can work loose when the surrounding tile or blocking wasn’t solid to begin with. The door then shifts and the gap at the strike side opens up. We check the substrate, not just the screw.
- Mineral and soap buildup clouding the glass. Yorba Linda’s inland water leaves hard mineral spots, and soap scum bonds to them. Left alone, the film etches the surface over time. Regular cleaning and the right sealant protect a panel you’d otherwise have to replace.
A typical call involves a Mr-Glass frameless shower door that no longer closes squarely or leaks at the bottom sweep. The usual cause is worn pivot hinges and a dried-out bottom seal; a qualified local pro would replace the hinges and sweep, re-align the door, and verify the glass is still sound before reinstalling. If that sounds like your shower, call (888) 356-5940 for a free estimate.
Mr-Glass Parts & Our Repair-vs-Replace Approach
Choosing the right part for a Mr-Glass enclosure comes down to fit, not brand loyalty. We use OEM Mr-Glass hinges, seals, and sweeps when matching original hardware for a clean fit, and quality aftermarket parts are fine for standard wear items as long as they meet the same thickness and tolerance specs. We don’t stock OEM or genuine Mr-Glass parts and we don’t order through the manufacturer as a dealer. What we do is match the part to your panel and your track so the door hangs right and seals right.
Our repair-vs-replace rule is simple. If the glass is intact, we repair the existing enclosure. Worn hinges, tired sweeps, and loose hardware are all fixable, and repairing keeps the panel you already have. If the glass is chipped at the edge or the frame is compromised, replacement is the safer call because a compromised tempered panel can fail without warning. We’ll tell you which side of that line your shower is on, and we won’t sell you a new enclosure for a screw and a seal. Call (888) 356-5940 to schedule a free estimate.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We check the door’s hang, the pivot hinges, the bottom sweep, the magnetic closure, and the glass edges. We look at how the panel meets the curb and the wall, because a leak is often a seal problem and sometimes a substrate problem.
- 2
Repair or install. For a repair, we replace the worn hinge, sweep, or seal and re-align the door. For a new installation, we set the enclosure over a sound, level base and confirm the glass thickness and tolerances before anything is fastened.
- 3
Test. We open and close the door through its full swing, check that it meets the strike squarely, and run water to confirm the bottom sweep and seals are holding. No handoff until it closes clean and stays dry.
- 4
Warranty and follow-up. We document the parts we installed and leave you with a clear record of the work. If a hinge or seal we installed misbehaves, you know what was replaced and when.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Yorba Linda
We service and install the Mr-Glass products that show up most in Yorba Linda bathrooms: frameless glass shower enclosures, semi-frameless shower systems, and custom glass panels. Frameless enclosures are the pick when you want an open, unobstructed look and you’re willing to have the hardware set correctly so the door hangs true. Semi-frameless enclosures give you more structure and a bit more forgiveness on an older shower base. Custom glass panels cover the openings that don’t match a standard size.
We also handle the surrounding scope, so a walk-in shower install doesn’t stop at the glass. That means tile base work, waterproofing, and the plumbing fixtures that go with it. You choose the brand and finish from the lines we work with, including Kohler, Moen, Grohe, and Toto, and we handle the installation. One contractor, every piece. Call (888) 356-5940 to schedule a free estimate in Yorba Linda.
We Also Service These Brands
We’re not a single-brand shop. Alongside our Mr-Glass work, we install and service cabinetry from KraftMaid and Wellborn, countertops from Cambria and Silestone, and plumbing fixtures from Kohler. That matters on a full bathroom or kitchen project where the glass, the cabinets, and the fixtures all have to line up. Spec’d to your standard, not ours. Call (888) 356-5940 to talk through the mix.
FAQs – Mr-Glass Construction Service in Yorba Linda
Is Construction Yorba Linda authorized by Mr-Glass? No. We are an independent service provider and are not affiliated with, authorized by, or endorsed by Mr-Glass. We work on Mr-Glass equipment and use parts that fit it, but we don’t represent the manufacturer.
Do you use quality parts that fit Mr-Glass equipment? Yes. We use OEM Mr-Glass hinges, seals, and sweeps when matching original hardware for a clean fit, and quality aftermarket parts for standard wear items as long as they meet the same thickness and tolerance specs. We don’t stock genuine Mr-Glass parts.
How long does Mr-Glass service take? Most hinge, sweep, and seal repairs are a single visit, and a new enclosure install typically runs longer depending on the base and tile work involved. The written estimate tells you what to expect for your scope. Call (888) 356-5940 for an exact quote. Estimates are free.
What kinds of Mr-Glass products do you cover? Frameless glass shower enclosures, semi-frameless shower systems, and custom glass panels. We also handle the tile base, waterproofing, and fixtures around them.
Will service void my Mr-Glass warranty? Service by an independent provider doesn’t automatically affect your warranty, but read your Mr-Glass warranty terms before any work so you know what it covers. We document every part we replace and install in a warranty-safe way.
How much does Mr-Glass construction cost in Yorba Linda? Typical estimated ranges for the work we do around Mr-Glass enclosures are below. The written estimate sets the final price. Call (888) 356-5940 for an exact quote. Estimates are free.
| Service | Typical Estimated Range |
|---|---|
| Walk-In Shower Installation | $4500 – $12000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
| Shower Replacement | $3000 – $8500 |
| Bathroom Remodel | $9000 – $28000 |
Book Your Mr-Glass Service in Yorba Linda, CA
If a Mr-Glass enclosure in your Yorba Linda home is leaking, sagging, or chipped, we can diagnose it and quote the fix. Call (888) 356-5940 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The written estimate sets the price, and you’ll know the scope before anyone starts.
Written by the team at Construction Yorba Linda.